I am told that Antec makes HEC PSU`s?
I didn`t know Antec made there own PSU`s.
Any comments??
I didn`t know Antec made there own PSU`s.
Any comments??
-
-
Re: Who makes HEC PSU`s?
http://www.hec-group.com.tw/
HEC/Compucase make their own PSUs, cases also. -
Re: Who makes HEC PSU`s?
Does Antec make anything at all or even design anything, other than the faceplates for their cases?Comment
-
Re: Who makes HEC PSU`s?
They don't - they're almost all ChannelWell. Or at least, the TruePower/Control series were.Originally posted by Thw_Watcher
Hehe, indeed.Originally posted by larrymoencurly
From Antec's site: leading brand of high performance computer components for the PC upgrade and do-it-yourself (DIY) markets..
No mention of "manufacturer", "designer" or even "rebadger", for that matter.Last edited by tiresias; 04-09-2006, 01:24 PM.Comment
-
Re: Who makes HEC PSU`s?
All Antec PSUs are either made by ChannelWell or Topower.Originally posted by JEDIYodaComment
-
Re: Who makes HEC PSU`s?
Topower? Are there new Antecs made by Topower I don't know about?Originally posted by Phil_123
Antecs used to be made by HEC. When the True Power and Smart Power came out is when I believe they started using Channel Well.
The NeoHE uses Seasonic inside.Rest in peace BFG. You were... a job...Comment
-
Hi Folks,
Just wanted to clear up a misunderstanding of mine (or what I expect is one). Isn't the 12V rail from the 24 pin, EPS and PCIE separated? IE if I put a power resistor on the ATX 12V pin that is not going to load, thus tell me if the EPS or PCIE rails are fine?
I was recently watching ArIs from Hardware Busters video on how to properly test ATX PSUs without using 5 figure Croma substations.
The PCB adapter he used breaks out the 12, 5 and 3.3V pins from the 24 pin and gives you banana plugs to connect to. That is a bit useless is it not? Aren't... -
Mounting and Handling Guidelines for TO220 TO220F TO247 Cases / Packages
The TO220, TO220F and TO247 are the popular packages for power devices because of their versatility and ability to dissipate moderate amounts of heat. This application note describes the basic guidelines for handling power MOSFETs in TO220, TO220 and TO247 packages shown in Figure 1. Please note that only mechanical and soldering guidelines are covered here. Additional precautions are required for isolating high voltage rated devices to meet safety regulations.
Securing a good thermal interface between...10-07-2024, 04:35 AM -
While recaping Antec Earthwatts EA-380 I've broke one side of unknown smd element, it have no print, it's flatter and darker than smd capacitors on this board, shaped more like resistor but it's not resistor ofc. Unfortunetly the printed description was under it and element was glued to the board so I cant read/tell the letter before element number too. Have anyone any idea what it is? Maybe is there any diagram of this PSU?
... -
In my search for a proper 5v heavy ATX power supply, I selected an old Antec SU-380 that I've had in storage for a long time. Opening the power supply reveals a couple bulged capacitors. I removed all the caps and made a map for myself. I found the datasheet for the PCE TUR series in this thread:
https://www.badcaps.net/forum/showthread.php?t=14159
It says these are general purpose, so I assume I can replace them with any general purpose capacitors, but I don't really know anything about power supply circuits or reading capacitor datasheets. Despite this, I've been shopping for replacements:... -
Hello,
I'm currentlly in the process of trying my first power supply repair (really my first soldering project) and have some questions with regard to which capacitors to replace the bad ones.
The power supply is an Antec Smart Power SL300S ATX12V 300 watt.
I have successfully desoldered every capacitor from the board without destroying anything (I think) and I am currently in the process of choosing which caps to order. This is where I'd like a little community wisdom.
Now the capacitors inside are mostly Fuhjyyus (a forum favorite) with 1...
Comment